The Adaptor can switch the load channels of NMEA 2000 digital switching equipment on or off. "Trip Fuel Consumption, Vessel" which displays the sum of the fuel volume in selected tanks. In the settings you can join several tanks for correct calculation of "Estimated Fuel Remaining" data for PGN 127496 Firmware updates are available only with Yacht Devices gateways (Wi-Fi, USB or Ethernet). Installation description strings is required.
Differance between nmea 2000 connectors Pc#
The NMEA 2000 PC gateway (from any manufacturer) or MFD which allows editing of Switching functions, connection in parallel with analog gauges, using voltage sensors) However, for advanced configuration (calibration curves, digital The Device is equipped with a hidden button that allows switching among 15 configuration Connection in parallel with an existing analog 2-coil gauge: (1) - YDTA, (2) - Gauge, (3) - Fluid sensor, (4) - Optional button, (5) and (6) - Other sensors (optional) Sensor readings can be calibrated with 12 calibration points to get accurate readings on tanks of any shape. The four measuring channels of the Device may have individual settings. If you have a combined gauge where you choose the value to display with a button, the Adapter will smoothly work with it, too. (2-coils and 1-coils gauges are supportedl see Picture 2), or in parallel with a Volvo Penta engine's MDI (Mechanical Diesel The Adapter can be installed as a standalone measuring device, in parallel with an existing analog gauge Voltage signal in the range of 0 to 16 Volts. The Device can also be used with fluid level sensors, which output an analog (0 to 310 Ohm range) standard fluid level sensors as well as with any nonstandard sensors with maximum The Device can be used with European (10 to 180 Ohm range), American (240 to 33 Ohm range) or Japanese It can be configured from MicroSD card and log fuel usage. Only have one tank, look at model YDTA-01. The tank number can be configured up to 16 tanks of one type are allowed in an NMEA 2000. The Adapter can be configured to report one of the seven fluid types defined in the NMEA 2000 standard:ĭiesel Fuel, Gasoline Fuel, Oil, Fresh Water, Waste Water, Black Water (Sewage), or Live Well. Resistive or voltage type fluid level sensors installed on tanks and display the fluid level on NMEA 2000 devices, including chart plotters. The NMEA 2000 Tank Adapter YDTA-04 allows you to connect up to four of existing
0 kommentar(er)
